If the emulsified asphalt equipment is not maintained during use, it will lead to a short cycle and problems will often occur during use. Only by doing a good job of maintenance can the equipment operation efficiency be improved. For example, during maintenance, the following points must be grasped.

It is necessary to regularly check the wear condition of the internal components of the mechanical equipment, such as the core feed pipe, the rough jaw plate on the impeller, the cone cap, the wear level of the jaw plate, the rain shield on the circle, and the wear condition. If the wear is serious, it is necessary to replace or repair it in time. When replacing, it is also necessary to pay attention to the model specifications and specifications, and replace it according to the original components as a reference.
For asphalt pavement reconstruction equipment, two layers of separate pre-screening modules should be configured. The soil used for raw materials, including the sand and gravel used, must be strictly inspected and pre-screened to ensure that they meet the on-site application standards before they can enter the plastic belt pavement milling machine material crushing and screening equipment at the bottom. For example, the soil in the raw materials must be transported through the pre-screening belt on the side to improve the equipment productivity and control costs.
The raw materials of asphalt pavement are then mixed with asphalt mixture, transported, and constructed. Due to the effects of heating and different natural factors, the filter element will gradually age, and the colloidal structure will also change, which will cause the asphalt penetration to decrease, but the viscosity will increase, the elongation will decrease, and the composite fluidity, which reflects the rheological properties of asphalt, will also decrease. Asphalt is more obvious in terms of non-Newtonian properties.
In the construction of asphalt pavement, not only the maintenance of the filter surface equipment should be paid attention to, but also the maintenance of raw materials should be paid attention to. Only when the equipment is well maintained and the equipment is good, can the asphalt pavement have strong adhesion and long service life. For customers, the paving of asphalt pavement should also pay attention to the selection of equipment. Good equipment is easier to use during application and can also improve efficiency. Such equipment is worth choosing.