Maintaining a synchronous chip seal pile truck is crucial and can be done in the following ways:
First, daily inspections are essential. Before and after each workday, inspect the vehicle's exterior for collision damage, paint peeling, etc. Check tire pressure and even wear. Also, check all pipes and joints for leaks, especially asphalt and hydraulic lines.

Second, regular cleaning and maintenance. Regularly clean the vehicle's body, chassis, and working devices to remove attached asphalt, chip, dust, and other debris. Clean the engine radiator and air filter to ensure good engine cooling and clean air intake. Thoroughly clean working devices such as the asphalt spray bar and chip spreader to prevent blockages.
Third, proper lubrication is crucial. Lubricate all lubrication points on the vehicle at specified intervals, including the drive shaft, bearings, and chains. Use appropriate lubricants and greases to ensure effective lubrication.
Finally, hydraulic system maintenance. Regularly check the hydraulic oil level and quality. If the oil level is too low or the oil quality deteriorates, add or replace the hydraulic oil promptly. Check the hydraulic system pressure to ensure it is normal and inspect all hydraulic components for leaks or damage.
Finally, perform engine maintenance. Regularly change the engine oil and filter, and check the coolant level and quality. Inspect and maintain the engine's intake and fuel systems to ensure good engine performance. Simultaneously, strictly follow the operating procedures when using the synchronized chip seal vehicle to avoid damage caused by improper operation.