Precautions for the use of emulsified bitumen

Bitumen emulsion equipment is widely used in new technologies and new processes for preventive maintenance. Bitumen emulsion plant is an emulsion at room temperature formed by dispersing bitumen into the water phase. It is a new material that is made of natural materials. It is different from traditional Compared with hot bitumen, it saves more than 50% of energy, saves 10%-20% of bitumen, and causes less pollution.

The bitumen decanter equipment is mainly composed of barrel removal shell (BOX), hoisting mechanism, hydraulic booster and electrical control system. The shell is divided into two chambers, the left and right chambers. The upper chamber is a chamber for melting a large barrel of bitumen (definition: the transformation process of a substance from solid to liquid). There are heating coils evenly distributed around it.

Slurry sealers are important equipment for road maintenance and repair. They are mainly used to pour durable asphalt mixtures on old roads to form a new protective layer. This equipment can be constructed according to the surface texture of the road surface, so that the cracks in the surface layer are isolated from water and air, effectively preventing the road surface from aging further.
The working principle of the slurry sealer is to mix materials such as aggregate, emulsified asphalt and additives into slurry, and then evenly lay it on the road surface. The slurry formed after the mixture of these materials has good waterproof and skid resistance, which can significantly improve the service life of the road surface and driving safety.

As technology becomes more and more advanced, we use more and more equipment in our lives, and the functions are also very complete. Synchronous crushed stone seal is also a product used in many places. After continuous improvement and development, it has many functions. Next, we will introduce to you the problem of preventive maintenance of synchronous crushed stone seal? If you want to know, you can read it together.

During the use of emulsified bitumen equipments, if maintenance is not paid attention to, the cycle will be short, and problems will often occur during use. Only by doing a good job of maintenance can the operation efficiency of the equipment be improved. For example, during maintenance, the following points must be grasped.
It is necessary to regularly check the wear condition of the internal structural components of the mechanical equipment, such as the core feed pipe, the rough jaw plate on the impeller, the cone cap, the wear level of the jaw plate, the rain shield on the circle, and the wear condition. If the wear is more serious, it is necessary to replace or repair it in time. When replacing, it is also necessary to pay attention to the model and specifications, and replace it according to the original components as a reference.

Emulsified asphalt is an emulsion that disperses asphalt into the water phase to form a liquid at room temperature. This determines that emulsified asphalt has many technical and economic advantages over hot asphalt and diluted asphalt. We know that modified asphalt equipment is a road engineering machinery. In order to better promote users’ understanding of it, today the editor will introduce its characteristics to you so that users can better understand that modified asphalt equipment is used for modified asphalt. It consists of a main machine, a modifier feeding system, a finished product tank, a heat transfer oil reheating furnace and a microcomputer control system. The main machine is equipped with a mixing tank, a dilution tank, a colloid mill and an electronic weighing device. The entire production process is controlled by a computer automatic program. In addition, it can be learned that the product has the advantages of reliable quality, stable performance, accurate measurement, and convenient operation. It is an indispensable new equipment in highway construction. The advantages of asphalt equipment are prominently reflected in its two-way modification effect, that is, while greatly increasing the softening point of asphalt, it also significantly enhances the low-temperature ductility, improves the temperature sensitivity, and has a particularly large elasticity and recovery rate. The modified asphalt equipment has a long service life and a safe and reliable production process. The rotor and stator are specially heat treated, and the service life of the equipment is more than 15,000 hours.

The fine surface is made of stone with a single particle size, which has high wear resistance and anti-slip properties. The construction of the fine surface adopts mechanized construction, which requires less manual labor and has the characteristics of fast construction speed, anti-skid and noise reduction.
The special bonding material for fine surfaces produced by Sinoroader Group has the characteristics of good bonding performance and good durability. The specific construction process is roughly as follows:

Conventional pit repair techniques are mainly hot material repair and cold filling repair, and warm mixing technology is used to ensure compaction, while there are also some special repair methods such as slurry seal/micro-surface material repair

After the rubber bitumen storage tank is cleaned, the wood chips are sent to the rubber bitumen storage tank, and the wood chips and the bottom of the rubber bitumen storage tank are wiped with wood chips. The dirt and wood chips in the bitumen tank can be weathered naturally. The rubber bitumen storage tank is not allowed to be damaged. Check the technical specifications of the underwater concrete processing equipment and ventilation equipment.
The bottom of the rubber bitumen storage tank drain pipe is discharged from the drainage pipe, and the waste water is discharged into the empty tank or other containers through the inlet and outlet and the self-draining pipe. Open the Shenzhen manhole into the plastic suction pipe and pave the Shenzhen manhole with asbestos to reduce the discharge of oil and gas. When manually pumping the bottom oil, two people should be operated to improve the labor efficiency of the workers and send the fuel tank to supervision.

1. Emulsion Batching System: Automatic temperature control, manual weighing and batching, equipped with a timed agitator and a residual material vent.
2. Asphalt Batching System: Automatic temperature control, equipped with a timed agitator and a residual material vent.
3. Production System: Manually adjust the metering pump speed according to the set recipe to achieve ratio adjustment. The asphalt pipeline and pump use electric heating for automatic temperature control.
4. Sampling: Sampling is required during production for observation and related testing.
5. Finished Product System: Optional direct or cooled discharge is available. Finished product tanks are provided for pumping the finished product into the tanks.
6. Control System: The control system consists of intelligent temperature sensors, instruments, and conventional electrical appliances for easy inspection and maintenance.
7. Energy-Saving System: During the emulsified asphalt enters the finished product, a heat exchanger is used to dissipate excess heat to heat the water.

Everyone must be familiar with slurry sealing and micro-surfacing. But do you know their 7 construction steps?
Slurry sealing and micro-surfacing were both early preventative highway protection technologies. Its function is to ensure the smooth use and extended life of the highway. The construction steps are as follows:

In the asphalt-water system, the emulsifier molecules move between the asphalt and water interface, and the water-loving groups of the molecules are adsorbed on the surface of the asphalt, making it charged, while the hydrophilic groups enter the water phase. This connects the asphalt particles with water, reducing the interfacial tension between the two. At the same time, because the asphalt particles have the same charge and repel each other, they are prevented from agglomerating with each other, so that the asphalt emulsion can remain uniform and stable for a certain period of time. The nature of the charge is determined by the charge of the hydrophobic group or hydrocarbon chain of the emulsifier. If it is negatively charged, the asphalt particles are negatively charged, and the emulsion formed is an anionic asphalt emulsion. Otherwise, it is a cationic asphalt emulsion. If the asphalt particles have both negative and positive charges, the emulsion is a zwitterionic asphalt emulsion; in addition, there is also a non-ionic asphalt liquid.

The engine is the source of power for the vehicle. If the synchronous sealing vehicle wants to perform normal construction operations, it must ensure that the engine is in good condition. Routine maintenance is an important means to effectively prevent engine failure. How to maintain it is determined by Xinxiang Junhua Special Vehicle Vehicles Co., Ltd. will take everyone to understand.

There are many ways to heat bitumen, including using fire source heating, electric heating, steam heating, hot water heating and indirect heating. Fire source heating generates heat by burning fuel to heat the bitumen to a molten state. Electric heating converts electrical energy into thermal energy through electric heating elements to heat the bitumen to a molten state. Steam heating transfers heat to bitumen through steam, heating the bitumen to a molten state. Hot water heating transfers heat to the bitumen through hot water, heating the bitumen to a molten state. Indirect heating transfers heat to the heating medium, which then transfers the heat to the bitumen to heat the bitumen to a molten state.

Emulsified asphalt equipment is a widely used asphalt equipment. Now its ultra-high performance has been widely praised by users. However, we must first ensure the safe use of emulsified asphalt equipment to fully demonstrate its performance; modified asphalt equipment is an asphalt binder made by adding rubber, resin, high molecular polymer, ground rubber powder or other fillers and other admixtures (modifiers), or taking measures such as mild oxidation of asphalt to improve the performance of asphalt or asphalt mixture; So how much do you know about the safe use and operation of modified asphalt equipment? Today, the editor will tell you;
Placement: The modified asphalt equipment should be placed on a flat place, and the front axle wheel should be fixed with sleepers and the tires should be dangling to ensure the stability of the machine during work.
Regularly inspect whether the mixer blades are deformed and whether the screws are loose.
Inspect whether the running direction of the mixing barrel is consistent with the arrow; if not, please replace the positive and negative poles of the wiring.
Before powering on, you should inspect and test run the empty vehicle, check for leakage, and check the idling of the mixing barrel. The normal speed is about 3 times faster when the empty vehicle is full. If the speed is wrong, you should stop the machine and check the asphalt tank.
Note: After the asphalt material is mixed, it is best to stop the machine for one hour, clean the drain material in the mixing barrel, pour in clean water, and clean the mortar. Then drain the water. Remember that there should be no water accumulation in the barrel to prevent the formula from changing, and the blades are prone to rust. During use, everyone should pay attention to these small links to avoid unnecessary losses to their work.

Asphalt melting equipment is an important road construction tool used to heat asphalt to the appropriate temperature for construction. It can provide reliable solutions and make road construction more convenient. The working principle of this equipment is to heat the asphalt to the appropriate temperature through a heater, and then transport the hot asphalt to the construction site through a conveying system.

As we all know, emulsified bitumen is a single-component black viscous liquid that can combine the roadbed and the pavement to improve the performance and service life of the road. So what problems should be paid attention to when using emulsified bitumen? Let’s follow the editor of Sinoroader Group, an emulsified bitumen manufacturer, to learn about it.

As a manufacturer with many years of experience in emulsified bitumen construction, Sinoroader Group believes that everyone needs to pay attention to the following 2 points when using it:

What details should be paid attention to when adding materials to the emulsified bitumen equipment? Speaking of emulsified bitumen equipment, I don’t know how much you know? What should we pay attention to when adding materials?
The black anti-static tweezers grinding wheel of the emulsified bitumen equipment has no heating barrel. Before use, you must first add an appropriate amount of diesel, let the black anti-static tweezers circulate for 3 to 5 minutes to generate heat (the temperature after operation is about 80 to 100 degrees) Open the shut-off valve on the oil pipe and discharge the diesel in the machine. The temperature of the black anti-static tweezers grinding wheel is about 80 to 100 degrees before it can be loaded and put into production. If there is a heating collet, heat the grinding wheel before starting, and then load the materials for production.

I believe that after a long period of contact with asphalt tanks, everyone knows that the working efficiency of emulsified asphalt equipment actually depends on the operator. The more experienced the operator is and the stronger his ability to deal with various emergencies is, the higher the working efficiency will be, and the safety will be guaranteed. Mastering more equipment-related knowledge is what every friend should pursue. Today, the editor will explain to you the details that need to be paid attention to when operating emulsified asphalt equipment:

Asphalt emulsifiers can be divided into synthetic emulsifiers, natural emulsifiers, inorganic powder emulsifiers, etc. according to their formation. Synthetic emulsifiers are currently the most widely used. Asphalt emulsifiers are a type of organically synthesized surfactant that can emulsify asphalt.
Emulsifiers are divided into ionic and non-ionic types according to whether the hydrophilic group of the emulsifier molecule is charged when the emulsifier is dissolved in water. Ionic emulsifiers are divided into cationic and anionic types due to the different charges of the hydrophilic group after ionization in water. In addition, there are zwitterionic types.
Cationic emulsifiers are divided into three types: fast cracking, medium cracking, and slow cracking according to the speed of demulsification. Slow cracking emulsifiers are divided into slow setting and fast setting according to the length of time the mixture solidifies. Slow cracking and slow setting types are mainly used as permeable oils. Slow cracking and fast setting are used for micro-surfacing, slurry sealing, cold regeneration, etc. Medium cracking and fast cracking types are used for adhesive layer oils, gravel sealing layers, and waterproof base oils.

Fillers used in emulsion bitumen equipment are generally divided into two types: chemically active and non-chemically active. In the production of emulsion bitumen equipment, it can improve the stability of the slurry mixture, speed up or slow down the demulsification speed, and improve the strength of the sealing layer. When adding chemically active fillers, the reaction and compatibility of the fillers with mineral materials and modified emulsion bitumen should be fully considered.

Urban road maintenance is an important part of ensuring road safety and smooth traffic, among which slurry seal and micro-surfacing are two common maintenance methods.
Slurry seal:
Composition: emulsified asphalt or modified emulsified asphalt
Function: waterproof, anti-skid, improve road surface appearance
Scope of application: cover surface of secondary trunk roads, lower seal layer of newly built roads
Micro-surfacing:
Composition: modified asphalt
Function: waterproof, anti-skid, wear-resistant, improve road surface appearance, repair ruts
Scope of application: expressways, trunk roads
Construction process:
Cleaning the road surface
Laying out the lines
Wetting the original road surface
Paving
Repairing
Maintenance
Opening traffic
Test section length ≥ 200m
When the original road surface is an asphalt road surface, it needs to be wetted with water in dry or hot weather; non-asphalt road surfaces should be sprayed with tack coat oil; the lower seal layer of semi-rigid base asphalt road surfaces needs to be sprayed with penetration oil.
For sections that need to be opened to traffic as soon as possible, a thin layer of sand can be spread.
Quality acceptance:
Before construction, check the test report of raw materials, slurry mixture design report, and paver calibration report.
The entire construction line is evaluated as a 1km section.
The main control items include skid resistance, water permeability, and thickness.
Through these steps, the service life of the road can be effectively extended and driving safety can be ensured.

Detailed summary of slurry seal specifications

Asphalt emulsifier is an emulsifier that belongs to the category of surfactants and is a raw material for the production of emulsified asphalt.
Emulsifiers are divided into: synthetic emulsifiers, natural emulsifiers, inorganic powder emulsifiers, etc. Currently, synthetic emulsifiers are widely used. Asphalt emulsifier is a type of chemical organically synthesized surfactant.

Improve the reliability of SBS bitumen emulsion plants: Once you have an established maintenance, it will help to identify problems. This will allow the maintenance plan and time to be carried out at your convenience. Regular maintenance will increase the normal operation time of SBS bitumen emulsification equipment, and it can be used when necessary. Low cost of operation: Imagine an SBS bitumen emulsification plant breaks down during a project. With a protective maintenance plan, such things happen less often because you have taken good care of the SBS bitumen emulsification plant.
If the SBS bitumen emulsification plant wants to maintain normal operation, then in the production process. All stages need to be maintained normal, among which the normality of the circuit system is an important aspect to ensure its smooth operation. Imagine that if there is a problem with the circuit during the on-site operation, it may affect the development of the entire project.
For users, of course, they don’t expect this to happen, so if the SBS bitumen emulsification plant is in the work of using the SBS bitumen emulsification equipment, if there is a circuit problem, it is necessary to take appropriate measures to solve it in time. The following article will give a detailed description of this problem, and the following SBS bitumen emulsification plant can be of benefit to everyone.

The hydraulic bitumen decanter equipment produced by our company uses thermal oil as the heat carrier and has its own burner for heating. The thermal oil heats, melts, debarks and dehydrates the asphalt through the heating coil. This device can ensure that the asphalt does not age, and has the advantages of high thermal efficiency, fast barrel loading/unloading speed, improved labor intensity, and reduced environmental pollution.

Asphalt spreader vehicle is an intelligent and automated high-tech product that specializes in spreading emulsified asphalt, diluted asphalt, hot asphalt, high-viscosity modified asphalt, etc.
Asphalt spreader is used for spreading the penetration oil, waterproof layer, and bonding layer of the bottom layer of the asphalt pavement of high-grade highways. The spreader consists of a car chassis, an asphalt tank, an asphalt pumping and spraying system, a thermal oil heating system, a hydraulic system, an ignition system, a control system, a pneumatic system, and an operating platform.
Asphalt spreader is cumbersome to operate. On the basis of absorbing various technologies of similar products at home and abroad, it increases the quality technology content of construction and the humanized design of outstanding improvement of construction conditions and construction environment. Its reasonable and reliable design ensures the uniformity of asphalt spreading, the computer control is stable and reliable, and the technical performance of the whole vehicle has reached an advanced level.

Asphalt anti-sticking release agent is a product used in the construction of hot asphalt mixture to solve the asphalt anti-sticking problem. It is used to replace diesel and vegetable oil! There are all kinds of things about the effect of asphalt anti-sticking release agent. How to use asphalt anti-sticking release agent?
Before use, stir the release agent evenly, spray or apply the original liquid evenly on the surface of construction equipment such as rubber-wheeled rollers, transport carriages, paver hoppers, ironing plates, etc.; or add water to the roller water tank after dilution, stir evenly and spray automatically for use.
When preparing to start construction, when the roller tires are cool or the temperature is low, you should first apply the roller tires with the release agent original liquid, and then start rolling. At the beginning, you need to apply more release agent. After the temperature of the tires rises, you can apply it normally or less. If you use intermittent spraying of release agent, you should spray more frequently at the beginning of construction.
When adding water, we recommend a ratio of 10-15 times. It will be better to use 10 times the water ratio. If you think the cost is high and want to add more water, it is also possible, but try to use less than 15 times the water ratio. If it is modified asphalt, it is recommended to use less than 8 times, and 7 times the water ratio is recommended.

1. There are generally three ways to heat emulsified bitumen plant: gas heating, heat transfer oil heating and open flame heating. The first is the gas heating method of emulsified bitumen plant. The gas heating method of emulsified bitumen plant requires the use of the fire pipe to transport the high-temperature smoke generated by high-temperature combustion through the fire pipe.
2. The heat transfer oil heating method of emulsified bitumen plant mainly uses heat transfer oil as a medium for heating. The heat transfer oil heating method has extremely high requirements for fuel. The fuel must be fully burned and the product must be transferred to the heat transfer oil after sufficient heat is transferred to the heat transfer oil pump for heating.
3. The open flame heating method of emulsified bitumen plant is the most direct and convenient heating method. Whether in terms of convenient transportation or coal consumption, the open flame heating method is the fastest choice, simple operation, sufficient fuel, structural design, and labor intensity are relatively reasonable.

Asphalt spreading trucks are used to spread the permeable oil layer, waterproof layer and bonding layer of the bottom layer of asphalt pavement on high-grade highways. It can also be used in the construction of county and township-level highway asphalt roads that implement layered paving technology. It consists of a car chassis, an asphalt tank, an asphalt pumping and spraying system, a thermal oil heating system, a hydraulic system, a combustion system, a control system, a pneumatic system, and an operating platform.