Introduction to the application benefits and the whole working process of asphalt mixing equipment

The application of asphalt mixing plants also involves selection issues. In order to give full play to the performance of the equipment, the model of the machine is mainly determined according to the actual situation of the construction site. It sounds relatively simple, but some details still need to be emphasized.
The so-called specific conditions of the construction site first include the size of the site; secondly, the properties, specifications and working dimensions of the enterprise’s supporting equipment. It is necessary to try to do a good job in all aspects to help improve production efficiency and ensure product quality. In the case of intensive network management, the network management function of the asphalt mixing plant must also be taken into account to avoid difficulties in future upgrades.

The basic working principle of the green asphalt mixing plants can be roughly summarized in the following ways:
To put it simply, an asphalt plant is actually a set of equipment that can mix several materials according to a predetermined ratio to form a relatively uniform mixture. It is currently widely used and is very important for the construction of different projects. Its performance Various aspects also have a great impact on the engineering quality of asphalt pavement.
Asphalt mixing plant equipment is usually divided into two structures. The intermittent type is relatively more complex in structure and process. The aggregates need to be screened twice and then measured in batches. The batching accuracy is higher. , the mixing quality is good and can meet different construction requirements. The continuous type has a slightly lower accuracy due to its simple structure and simplified operating procedures.

People pay more and more attention to urban construction, and the use of asphalt is increasing. The application rate of asphalt mixing station is naturally growing rapidly.
Asphalt mixing station will encounter some faults more or less during use. The most common ones are uneven wear of the supporting wheel and wheel rail. Sometimes there will be some abnormal noise and gnawing. The main reason for this is that after the asphalt mixing station has been working for a period of time, the internal drying cylinder will be subjected to high temperature, and then friction will occur between the supporting wheel and wheel rail.
The above situation will also be accompanied by severe shaking, because the asphalt mixing station will directly cause the gap between the wheel rail and the supporting wheel to be improperly adjusted under the action of the drying material, or the mutual position of the two will be skewed. When encountering this situation, the user should add grease to the surface contact position of the supporting wheel and the wheel rail after daily operation.
In addition, the staff also need to pay attention to and timely adjust the tightness of the fixing nut while adding grease, and then effectively adjust the spacing between the supporting wheel and the wheel rail, so that the asphalt mixing station can work smoothly, all contact points can be evenly stressed, and there will be no shaking.

We know that the first priority in production is to ensure safety. In the process of operating equipment, staff must always pay attention to using the correct operating methods. Regarding the asphalt mixing plant, it is used to produce asphalt mixtures, modified asphalt mixtures, and colored asphalt mixtures to meet the needs of highways, graded highways, municipal roads, airports, etc.

Oscillating screen. It can screen the heated aggregate according to the design. It requires fully enclosed, double oscillating motor replacement (replacing one substance for another (mostly the strong one takes the place of the weak)) eccentric shaft oscillation, each The layer screen is easy to install quickly. The service life of the drying roller and the power part is not less than 6000h. The roller can fully use heat, the material curtain flows evenly, and the inclination is required to be adjustable.

Determining the material is a necessary stage in the design process of asphalt mixing equipment, and it is also one of the most critical links, because the material will be directly related to the use effect and service life of the entire equipment. Generally, when we determine the machine material, we usually base it on the characteristics of the working medium, and the same is certainly true for asphalt mixing equipment.

The development prospects of asphalt mixing plants are very good, and the product competition on the market is also very fierce. When the equipment is used, uneven wear of the supporting wheels and wheel rails often occurs, and sometimes there are some abnormal noises and edge gnawing. The main reason is that after the asphalt mixing station has been working for a period of time, the drying cylinder is exposed to high temperature and friction occurs between the supporting wheel and the wheel rail.
Under the action of drying materials in an asphalt mixing station, the equipment will vibrate violently, which will directly lead to improper adjustment of the gap between the wheel rail and the supporting wheel, or mutual interference between the two. The position is skewed, so the operator needs to add grease to the surface contact positions of the supporting wheel and the calibrating wheel rail after every day’s work.

1: The site should be located on higher ground and away from residential areas and densely populated areas.
2: The venue should consider the transportation distance and choose a location with convenient transportation.
3: Determine the website construction plan according to the terrain

The site selection of the asphalt mixing station should follow three principles. Let’s take a look:
1. When selecting the site for the asphalt mixing station in the early stage of construction, the construction party should pay attention to the line direction of the construction site, because the line direction of the construction site will directly affect the quality of the mixed asphalt. Asphalt is an important material used for road and engineering construction. If the quality is poor, it will inevitably have a serious impact on the quality and safety of the entire project. Therefore, when selecting the site, it must be considered in many aspects, and meet the on-site requirements, and confirm the location of the mixing station according to the drawings.
2. Secondly, it is necessary to have a full understanding and grasp of the basic elements of the asphalt mixing station construction, such as whether water and electricity can be supplied normally, or whether the size of the land is sufficient to build an asphalt mixing station.
3. Since the use of asphalt mixing stations belongs to mechanized construction, there will inevitably be dust, noise and other pollution problems during the operation. It can be seen that when selecting the site, it must be kept as far away as possible from residential areas, schools or farms to avoid a greater impact on the surrounding environment.

The actual operation steps of drying drum of asphalt mixing equipment: 1. Pay attention to routine inspection; 2. Proper operation steps; 3. Effective maintenance.
Drying drum is a cylindrical device specially used for heating and drying stones in asphalt mixing equipment. Proper application and maintenance of drying drum can maximize the performance of drying drum, increase its service life and reduce application cost. Let’s take a look at the actual operation steps below.
1. Pay attention to routine inspections
The asphalt mixing equipment drying drum has been tested and inspected before leaving the factory, but it will be subjected to vibration and vibration during transportation to the construction site. A comprehensive inspection should be carried out before use: check whether all anchor bolts are tightened; whether all key pins are properly driven; whether all drive devices are adjusted according to the manufacturer’s instructions; whether all pipe connections are appropriate and whether the three-way joints are reliable; whether the entire equipment is fully lubricated; start the motor and check whether all parts can rotate steadily in the correct rotation direction; whether the pressure gauge can work normally and whether the valve is adjusted to the correct working pressure; whether the burner ignition mechanism is available and whether the gate valve is open.
2. Correct operation steps
After the equipment is started, it is recommended to control the machine manually at the beginning, and then switch to the automatic control mode after achieving the required production volume and pouring temperature. The stone should be dried and have a stable moisture content as much as possible so that the stone can maintain a stable final temperature when passing through the drying drum. If the stones delivered to the drying drum change frequently and the moisture content changes each time, the burner should be adjusted frequently to compensate for these changes.
The stones directly from the crushed stone have a relatively constant moisture content, while the stones from the outdoor storage yard have a higher moisture content, and the moisture content of different piles varies greatly. Therefore, it is best for the stones to come from the same source.

Colored asphalt pavement is a kind of special pavement material that mixes colored particles into asphalt and then lays on the pavement

When paving roads, asphalt is still needed, and special equipment is also needed when mixing asphalt. Among them, asphalt mixers can also be used with high efficiency, and have become a major equipment that construction units are concerned about. So what are the characteristics and advantages of such equipment, and in what aspects are they mainly reflected?
1. It is simpler and more convenient to use and operate
The current asphalt mixer equipment is still mainly designed in a modular way. It can be said that the design is more reasonable. This design method also makes the equipment easier and more convenient to carry and install. As long as it is on the construction site, it can be used well, and it can also be moved quickly, so that it can meet the needs of different scenarios.
2. Higher work efficiency
Not only that, the mixing blades of the asphalt mixer equipment itself are also very unique in design. It can be said that it is directly driven by power to and from Ancheng, so this design also makes the entire equipment safer and more reliable, and the work efficiency is also relatively high. Moreover, because the relevant motor vibration screen is used, the failure rate of the equipment is also reduced, so that the construction unit does not need to worry about the use of the equipment and can use it with confidence.
Nowadays, asphalt mixers can reduce floor space and ensure stability during operation. Therefore, when construction units use equipment, they still need to pay attention to multiple aspects, especially the use specifications of the equipment itself. These are all things that need to be paid attention to. Only in this way can the use effect of the equipment be ultimately ensured and the asphalt mixing work can be completed through this equipment.

Effective maintenance of the drying drum of the asphalt mixing plant can extend its service life and reduce the cost of use. Let’s take a look at how to maintain it reasonably.
1. The drying drum should be stopped when the aggregate is not running in the asphalt mixing equipment. After the work is over every day, the equipment should be operated to discharge the aggregate into the dryer. After closing the combustion chamber, the combustion chamber should be idle for about 30 minutes to cool down to reduce the impact or allow the machine to run automatically.
2. Install the drying cylinder fixing ring on the roller synchronously. Check the environment in the patrol ring regularly. Whether the roller is adjusted, the straight roller will automatically move to the conveying end, and then the bias will be adjusted to the correct position.
3. If the roller table is in contact with only one of the two thrust rollers, the gap sheet can be filled under the support roller until it is simultaneously subjected to the full width of the support ring. The specified nutritional state should be maintained by the thrust wheel, but it is used to compensate for the desire not to express.
4. If the drying drum is equipped with a drive device, a certain amount of power should be added in small amounts.

Due to raw materials or usage, asphalt mixing plants will be subject to a certain degree of wear or other failures during daily use. If they are not controlled or repaired in time, the problem will be further exacerbated. For asphalt mixing plants, what are the ways to prevent wear and failure?
If the asphalt mixing plant is not treated in time after being worn, it may corrode once it is in contact with air, rainwater, etc. for a long time. If the parts of the asphalt mixing plant are severely corroded, the service life and normal operation of the entire equipment will be affected.

At present, most asphalt mixing plants have different degrees of energy loss in use, and these losses have brought us serious waste. How to reduce energy consumption in these aspects and achieve efficient production?
First of all, we must first summarize which aspects have energy loss, and then we can find reasonable solutions based on these problems. Through research, it is found that there are four problems in the use of asphalt mixing plants and the production of asphalt mixtures. The content and measures are as follows:
The first aspect is the management of the pile. We can reduce the energy consumption of the asphalt mixing plant through 3 specific methods: 1. Appropriately reduce the stacking height of the pile; 2. Build an inclined pile site with a good drainage structure; 3. Build a waterproof canopy.

The renovation of the combustion-supporting system of the asphalt mixing plant and the use of DC frequency conversion CNC machining technology are all renovations of the original system. In addition to the above renovation plans, with the existing equipment and personnel, what other measures can be taken in the application to reduce the operating costs of concrete mixing plants?
At present, China has no mandatory national industry standards for heavy residual oil, and the quality of fuel oil varies greatly. Even from the same dealer, the quality difference between batches is very large, and it contains more residues. Therefore, bridge inspection equipment should be installed on the construction site, and professional personnel should inspect various performance parameters of gasoline and diesel to strictly control quality.
When the burner is working, if the flame of the combustion aid is red and the smoke from the ash removal chimney is black, this is the manifestation of poor atomization of gasoline and diesel and insufficient combustion aid. At this time, the following measures should be taken to deal with it: properly adjust the distance between the nozzle and the vortex plate, generally push it inward to a suitable distance, the purpose is to prevent the atomized oil cone sprayed from the nozzle from spraying into the vortex plate; effectively adjust the ratio of gasoline and diesel to gas, so that the gasoline and diesel increase the mass conversion law slowly, or the gas increase the mass conversion law quickly; promptly remove the carbon deposits and coke around the nozzle to prevent the flame from deflecting; heavy residual oil contains more residues, which can easily cause serious damage to the high-pressure oil pump and increase the working pressure, affecting the actual effect of atomization and the shape of the flame, so the high-pressure oil pump must be repaired or replaced in time; install metal filter devices in front of the first and second high-pressure oil pumps, and clean them frequently to prevent the residues in the gasoline and diesel from blocking the nozzle.
The operators should be trained in professional skills on a regular basis to strengthen their job responsibilities and moral education, so that they can establish their respective job responsibilities, understand the importance of their positions, understand the content of their work, and improve their professional level. Skilled operators can properly control the temperature of the asphalt mixing plant mixture to avoid gasoline and diesel waste.
In order to improve the combustion-supporting effect and effectively reduce the operating costs of asphalt mixing stations, Sinoroader Group kindly reminds that the following issues should be noted when using the burner in the asphalt mixing station: To improve the maintenance of the burner, the burner nozzle should be cleaned of charred materials and carbon deposits on the ignition electrode regularly. The nozzle can be disassembled according to the atomization status; the air-oil ratio of the burner is generally not adjusted, and the fuel pump pressure can be adjusted according to the smoke status and the temperature of the asphalt mixture; the sulfur dioxide generated by the combustion of light fuel oil has a strong corrosion to the bag, so the bag should be maintained regularly and the air pressure changes in the bag should be paid close attention to; water deashing will produce more foam, causing the sand settling tank to flow out, so the sand settling tank should be cleaned in time, and a watering design should be carried out to settle the foam; when the steam pressure decreases or the gear oil pump noise increases, the gear oil pump must be replaced.
When the burner is started, the fuel oil circulation system should be completed through the valve, and then the burner control box should be opened to start the burner. If the electronic ignition of the fuel oil fails, you can change the inlet tee and use the diesel engine for ignition. After the ignition is successful for 2 minutes, you can convert it into fuel oil. In this way, even the light fuel oil of lower quality can ensure combustion.

The quality of the asphalt mixing plant will be a key factor affecting the quality of the project. After reviewing relevant materials related to the production and construction of asphalt concrete, we summarized some cases of failures in asphalt concrete mixing stations during construction and analyzed the reasons.
1. Unstable output and low production efficiency of asphalt mixing plants
(1) Improper proportioning. The mix ratio of asphalt concrete is divided into target mix ratio and production mix ratio. Among them, the target mix ratio controls the cold material transportation ratio of sand and gravel materials, and the production mix ratio is the mixing ratio of various types of sand and stone materials in the finished asphalt concrete materials specified in the design. The production mix ratio is determined by the laboratory, which directly determines the off-site grading standard of the finished asphalt concrete. The target mix ratio is set to further ensure the production mix ratio, and can be adjusted appropriately during production according to the actual situation. When the target mix ratio or the production mix ratio is not appropriate, the stones stored in each measurement of the asphalt mixing station will be disproportionate, with some overflowing and some other materials, unable to be weighed in time, and the mixing cylinder will be idling, resulting in reduced output.

During the asphalt mixing process, we generally use complete sets of asphalt mixing plant equipment to carry out mixing operations. What are the benefits of using complete sets of equipment? Let’s take a look.
1. High efficiency
Complete sets of equipment can help improve production efficiency and ensure production quality.
2. Ensure quality
When mixing asphalt, a ratio will be set. For asphalt liquid used in different occasions, its ratio control has strict requirements. Only by ensuring its mixing method and mixing time can we ensure whether the asphalt liquid meets the production requirements. One of the benefits of using complete sets of equipment in the mixing station is that the quality can be effectively controlled.
3. Can be sampled
After the asphalt mixing plant is mixed, the relevant quality inspection personnel can conduct sample inspections to ensure that the mixed asphalt liquid meets the use requirements.
Using complete sets of equipment in the asphalt mixing plant can more conveniently control the mixing time and the order of feeding, and then effectively sample inspection, so as to ensure that the quality meets the construction requirements.

Asphalt mixing plants, what role? Asphalt mixing plants, also known as asphalt concrete production equipment, is a special facility for mixing, heating, dust removal and other process treatments for raw materials such as sand, mineral powder, asphalt, etc., to produce asphalt concrete for road construction. As an indispensable role in road construction, the responsibility of the asphalt mixing plant is not only to complete the production of asphalt concrete, but also to provide solid guarantee for road construction.

Asphalt mixing plant refers to a complete set of equipment used for batch production of asphalt concrete. Its main function is to produce asphalt mixture, colored asphalt mixture, etc., and has been widely used in road construction. However, during the production process of asphalt mixture, pollutants such as noise, dust, and asphalt smoke will be produced, seriously polluting the environment and threatening the health of workers. Therefore, under the current background of building a resource-saving and environment-friendly society in our country, it is very important to save energy and reduce consumption during the use of asphalt mixing plants. The following article mainly starts from the three factors that affect the asphalt mixing plant, and explores the energy saving and consumption reduction measures of the asphalt mixing plant, aiming to reduce the cost of asphalt production and improve the efficiency of the asphalt plant.

When it comes to asphalt mixing plants, I believe many people are familiar with them. Asphalt mixing plants are mainly equipment for producing asphalt concrete, they can achieve batch production and play an indispensable role in many port construction roads. Since the advantages of this equipment are very wide, there are still many precautions when using it. The following editor will briefly introduce to you what precautions are there when working in asphalt mixing plants?
1. Uniform dress
When working in an asphalt mixing plant, the staff must adopt uniform dress and customize special work clothes. If they are working outside the mixing plant or patrolling, they also need to wear safety helmets and safety protective gear. It is strictly forbidden to wear slippers to enter the workplace.
2. Warning
Before the mixing plant starts to operate, professional staff must pull the alarm to warn the surroundings. By warning, the information of starting work can be conveyed to the surrounding staff. For some irrelevant personnel, they should also stay away from dangerous places in time to avoid unnecessary accidents.
3. No open flames
When working in an asphalt mixing plant, the surrounding open flames must be extinguished and smoking is not allowed. If a problem occurs in the mixing station and maintenance is required, the maintenance personnel must wear safety belts before carrying out the maintenance.

Asphalt mixing equipment is a large-scale equipment, so you must pay attention to safety when using it to avoid accidents. But to put it simply, if you want to truly use it safely, you must master some basic common sense. The following main things must be kept in mind.

When using an asphalt mixing plant, first of all, it needs to have good stability. If it does not have good stability, then the asphalt mixing plant will not be able to meet the requirements of the project in terms of requirements or mass production. For road construction, the measurement requirements of asphalt concrete are relatively strict and precise. Only qualified asphalt concrete can make the quality of road construction meet the actual requirements. Therefore, the stability of the asphalt mixing plant is very important.

Emulsion bitumen equipment has stable product quality, closed material transmission, high degree of automation and civilized production, and is easy to standardize management. The double-mill configuration can be used to produce modified emulsified asphalt.
At present, emulsified asphalt equipment is widely used in new technologies and processes for preventive maintenance, such as fog seal, slurry seal, micro-surfacing, cold regeneration, crushed stone seal, cold mix and cold patch materials.
Emulsion bitumen equipment is an emulsion at room temperature formed by dispersing asphalt into the water phase. It is a new material for the use of elements. Compared with traditional hot asphalt, it saves more than 50% of energy and 10%-20% of asphalt, and has little pollution. The biggest feature of emulsified asphalt is that it can be stored at room temperature. It does not need to be heated during spraying and mixing, nor does it need to heat the stone. Therefore, it greatly simplifies the construction, avoids burns and scalds caused by hot asphalt, and avoids the fumigation of asphalt steam when paving high-temperature mixtures. It is very popular among road maintenance workers.

Asphalt mixing plant, also known as asphalt concrete mixing plant, asphalt mixing equipment. Refers to a complete set of equipment used for mass production of asphalt concrete. According to the mixing method, it can be divided into intermittent type and continuous type; according to the transportation method, it can be divided into fixed type, semi-fixed type and mobile type.

Asphalt mixing stations play an important role in road construction. This article starts from the site selection, commissioning, and acceptance of the asphalt mixing plant, and elaborates on comprehensive and reasonable planning to avoid disturbing the normal construction order.

The driving device is one of the important components of the asphalt mixing plant, so whether it can operate reliably must be highly valued to avoid adverse effects on the entire asphalt mixing plant. In order to ensure that the driving device in the asphalt mixing plant is indeed complete and reliable, the following maintenance measures are essential.