Code of conduct for safe operation of asphalt mixers
Customer Support
Your Position: Home > Blog > Industry Blog
Code of conduct for safe operation of asphalt mixers
Release Time:2023-11-10
Safety is the key point for any piece of equipment, and asphalt mixers are of course no exception. What I want to share with you is the knowledge in this area, that is, the safe operation specifications of asphalt mixers. You might as well pay attention to it.
In order to prevent the asphalt mixer from moving during work, the equipment should be placed in a flat position as much as possible, and at the same time, use square wood to pad the front and rear axles so that the tires are elevated. At the same time, the asphalt mixer must be provided with secondary leakage protection, and it can only be started after the inspection, trial operation and other aspects are qualified.
Code of conduct for safe operation of asphalt mixers_1Code of conduct for safe operation of asphalt mixers_2
During use, be sure to ensure that the rotation direction of the mixer drum is consistent with the direction indicated by the arrow. If there is any discrepancy, it should be adjusted by correcting the motor wiring. After starting up, always pay attention to whether the components of the mixer are operating normally; the same is true when shutting down, and no abnormalities should occur.
In addition, the asphalt mixer should be cleaned after the work is completed, and no water should remain in the barrel to prevent the barrel and blades from rusting. , the power should be turned off and the switch box should be locked to ensure safety.