Quickly resolve bitumen melter equipment operation and maintenance
Customer Support
Your Position: Home > Blog > Industry Blog
Quickly resolve bitumen melter equipment operation and maintenance
Release Time:2024-04-23
When operating solder evaporation equipment, you need to pay attention to safety and follow correct operating procedures and procedures. First, you need to check whether the equipment is intact, then turn on the heating system, and wait for the equipment to reach the appropriate temperature before adding solder. Stir continuously during the feeding process to prevent the aluminum alloy from agglomerating. Clean the equipment promptly after use and keep the equipment clean and hygienic.
Brazing temperatures vary with different materials, processes and equipment. Generally speaking, the heat-melted soft petroleum stent should be used at 160°C; the brazed stent with better flow can be used at 135~248°C, or operate according to the manufacturer's product instructions; the liquid petroleum stent heated by coal tar can be used at normal temperature. Consumption power aggregation can be used.
Quickly resolve bitumen melter equipment operation and maintenance_1Quickly resolve bitumen melter equipment operation and maintenance_2
However, it should be noted that high temperature will destroy the emulsification and hydrophobic effects and require changes in cervical properties. Therefore, construction and use must be strictly carried out in accordance with relevant regulations to ensure project quality and requirements.
Equipment maintenance is also very important. Check the equipment regularly to ensure that all components are functioning properly. If any wear or damage is found, replace or repair it in time. At the same time, attention should also be paid to equipment maintenance, such as lubrication, rust prevention, etc., to extend the service life of the equipment.
In short, it is very important to operate and maintain asphalt melting equipment correctly to ensure the normal operation of the equipment, improve work efficiency, and extend the life of the equipment.