Asphalt melter equipment needs to undergo certain tests. What are the key points of its test methods? I don’t know how much we actually know. We need to understand the basic information before using it. Now we will give you a detailed description:

The asphalt specimen is heated and filtered, and a specified proportion of anti-flaking agent is added, and mixed by hand or with a stirring device to make the anti-flaking agent evenly dispersed in the asphalt specimen; a plastic film heating test is carried out on the specimen for heating For aging, use water step or water boiling method to test the adhesion of asphalt and crude asphalt mixture;
When necessary, we can use asphalt mixtures that have not been heated and aged with plastic films to conduct adhesion tests, or we can use cement concrete that has not been aged to conduct horizontal stability tests and carry out comparisons to determine the heat resistance of the anti-stripping agent. than long-term application effect.
Carry out accelerated aging treatment for hot mix asphalt mixtures using anti-stripping agents; conduct water immersion Marshall tests and impulsive crusher tests of the mixtures to evaluate the horizontal stability of the asphalt mixtures.
The main test method of asphalt melter equipment is this. We must carry out effective operations according to the instructions, so as to fully demonstrate its characteristics. A large number of high-tech technologies related to asphalt melter equipment will be sorted out for you again. Warmly welcome to view now.