The construction of asphalt mixing plants should be carried out in accordance with regulations, which can not only ensure the construction quality, but also ensure that the asphalt mixing equipment is not damaged. Although the key points of engineering construction are very important, the key methods of asphalt mixing plant construction should also be used flexibly.

First of all, before the construction of the asphalt mixing plant project, the collapsible loess on the top of the wall should be removed and kept dry, and the site leveling design elevation should meet the requirements of the design plan. If the soil layer is too soft, the roadbed should be reinforced with a structure to avoid the imbalance of mechanical equipment during construction and ensure that the pile frame is upright.
Secondly, the construction machinery and equipment entering the factory should be inspected to ensure that the machine is intact, and the assembly test run should be carried out under the premise of compliance with the regulations to ensure that the flatness of the asphalt mixing plant, the guide and the mixing shaft have an error of no more than 1.0% on the flatness of the road surface.
Afterwards, the layout of the asphalt mixing plant construction should be carried out according to the actual operation of the pile position plane design drawing, and the deviation should not exceed 2CM. The utility model adopts Φ25mm tap to install asphalt mixing device, and installs 110KVA construction electricity to ensure that its power supply and various transportation management methods are normal and stable.
After the asphalt mixing station is accurately positioned, the mixing station motor can be turned on, and the wet spraying method can be used to pre-mix the soil and move it down; until the mixing shaft moves down to the design, it can start to lift the drill and cut the soil at a speed of 0.45~0.8m/min.
The company's main products: asphalt mixing equipment, asphalt mixer, asphalt mixing station, asphalt mixture mixing equipment, thermal oil heating asphalt equipment.